Ceramizer CB – Manual Transmission & Rear Axle Treatment

? Description

Ceramizer CB is an advanced ceramic‑metal transmission treatment designed to restore, protect, and extend the life of manual transmissions, transfer cases, differentials, and rear axle gearboxes. This nanoceramic additive works directly in the gearbox oil, forming a durable anti-wear layer without requiring any disassembly or oil changes. Just add the dose, drive 1,500 km, and let it regenerate worn metal surfaces—synchronizers, gears, bearings—while eliminating grinding and noise .

⚙️ Specifications

• Product Code: 000004 CB

• Application: Manual gearboxes, rear axles, transfer cases

• Form: Liquid additive (~4.5 g per dispenser)

• Coverage: One dispenser treats 5–8 L of gearbox/rear‑axle oil CeramizerCeramizer

• Compatibility: Works with all types of gear oils

? Features

1. Metal–ceramic layer formation
   Fills micro‑cavities and smooths friction surfaces — synchronizers, bearings, gears  

2. Eliminates gear noise/grinding
   Restores smooth shifting and quiet operation .

3. Protects against wear
   Coating achieves friction coefficient below 0.02 — ~10× less than untreated steel-on-steel .

4. Increases service life up to 5×
   Effective protection for approximately 100,000 km .

5. No dismantling or oil change needed
   Easy “pour‑in and drive” maintenance .

? How to Use

1. Warm up vehicle to normal operating temperature.

2. Shake the dispenser well.

3. Remove gearbox or rear‑axle filler plug.

4. Add 1 dispenser (~4.5 g). If there's a long filler neck, pre‑add a little oil before and after the additive.

5. Replace the filler plug.

6. Drive at least 10 km, including some reverse shifts (~100‑300 m).

7. Continue driving for 1,500 km; do not change the oil during this period