Ceramizer CS – Engine Oil Additive for 4‑Stroke Engines

? Description

Ceramizer CS is a ceramic-metal nanotechnology additive that regenerates and protects engine components by forming a durable, anti-wear coating on internal friction surfaces. It restores piston rings, cylinder walls, bearings, and other engine parts—without disassembly or oil replacement. Just pour it into hot engine oil and drive. The metal-ceramic layer forms automatically under normal operating conditions 

⚙️ Specifications

• Product Code: 000001 CS

• Application: 4‑stroke internal combustion engines (petrol, diesel, LPG, hybrid)

• Form: 4 g syringe / dispenser

• Coverage: One dose treats 2–8 L of engine oil; dosage scales with oil capacity and mileage .

• Compatibility: Suitable for all oil types, turbocharged engines, catalytic converters, DPF/DPF-equipped vehicles, LPG/CNG systems 

? Features & Benefits

• Regeneration of friction surfaces: Rebuilds worn surfaces, improves compression, and reduces wear .

• Smoother operation & reduced noise: Less vibration, quieter idling, easier cold starts .

• Improved fuel & oil efficiency: Reduces oil consumption, lowers fuel usage by ~3–15% .

• Emission improvements: Achieves better performance, reduced toxic emissions, and improved engine response .

• Non-blocking & filter-safe: Ultra-fine particles freely pass through oil channels and filters; compatible with DPF/DPF systems 

• Long-lasting effect: The ceramic-metal layer remains effective for ~70,000 km or 1,200 engine hours .

? How to Use

1. Heat engine to 80–90 °C (e.g., drive or idle for ~10 min)

2. Turn off engine

3. Remove oil filler cap and inject 1 syringe into hot oil

4. Replace cap and idle engine for ~15 min

5. Drive carefully for 200 km (or ≈4 h idling with RPM ≤2,700) 

6. Then resume normal driving; do not change oil until 1,500 km (900 mi) is complete 

7. For older engines (≥85% wear) or high oil consumption (>0.4 L/1,000 km), increase dosage by 50–100% 

⚠️ Warnings & Notes

• Do not use with Teflon or molybdenum oil additives—flush or change oil first .

• Do not apply if engine has major mechanical damage (e.g., cracked rings) without repair .

• If engine has manual valve clearance, check and adjust after 1,500 km .

• With centrifugal oil filters, clean or bypass filter to ensure proper additive flow .

• Store below 40 °C; shake before use if stored in heat .

? Effectiveness

• Compression improvement in cylinders

• Quieter, smoother running

• 3–15% lower fuel consumption

• Reduced oil burn and smoke

• Protection lasting until ~70,000 km or 1,200 operating hours