Honda Genuine Oil Filter 15400‑PLM‑A02 – OEM Quality

Description

The Honda 15400‑PLM‑A02 is an OEM-quality spin-on oil filter manufactured primarily by Honeywell or Mahle. This filter is widely used across many Honda and Acura vehicles and is known for its high filtration efficiency and durability. It ensures optimal engine protection, especially when paired with synthetic motor oils.

---

Specifications

Type: Spin-On Canister

Thread Size: M20 x 1.5

Outer Diameter: ~68 mm (2.67 in)

Height: ~76 mm (3.01 in)

Filter Media: High-capacity synthetic/paper blend

Internal Valves: Anti-drainback valve and pressure relief valve

Seal Material: Nitrile rubber (heat-resistant)

Color: Honda Blue

---

Key Features

Excellent particle filtration to protect internal engine components

Direct OEM replacement for a perfect fit and function

Anti-drainback valve helps prevent dry starts

Supports long oil change intervals with synthetic oil

Easy to install with standard oil filter wrench

---

Compatible Vehicles (1984 – 2025)

This filter is compatible with a wide range of Honda and Acura models, including:

Vehicle Model Model Years Notes

Honda Accord 1984 – 2025 All trims and engine sizes

Honda CR‑V 1997 – 2024 All trims

Honda Odyssey 1995 – 2024 All trims

Honda Pilot 2003 – 2024 All trims

Honda Civic 2001 – 2023 1.8L and 2.0L engines

Honda HR‑V 2016 – 2024 All trims

Honda Ridgeline 2006 – 2024 All trims

Acura TL / TSX 2004 – 2014 All engine variants

Acura MDX / RDX 2007 – 2023 V6 engines

> Always verify compatibility using your VIN or service manual.

---

Installation Instructions

1. Remove the old filter with an oil filter wrench.

2. Apply a thin layer of fresh oil to the rubber gasket of the new filter.

3. Screw on the new filter by hand until the gasket makes contact, then tighten an additional ¾ turn.

4. Refill the engine with oil and check for leaks after starting the engine