K&N SO‑7020 – Select Series Cartridge Oil Filter

Description

The K&N SO‑7020 is a high-performance cartridge-style oil filter from the Select Series, engineered for reduced oil flow restriction and extended engine protection. Its synthetic blend media captures harmful contaminants while maintaining excellent flow rates, making it ideal for modern engines that require extended drain intervals and compatibility with synthetic or blended oils. Designed to fit a wide range of Toyota and Lexus vehicles equipped with 2.5L and 3.5L engines.

Specifications

• Filter Type: Cartridge (element-style)

• Media Type: Synthetic blend for high filtration efficiency

• Bypass Valve: Not included (integrated in engine housing)

• Anti-Drainback Valve: Not required for cartridge style

• Gasket Material: High-temp Viton® rubber

• Height: ~64 mm (2.52")

• Outer Diameter: ~70 mm (2.75")

• Inner Diameter: ~28 mm (1.11")

• Oil Compatibility: Synthetic, conventional, or semi-synthetic oils

• Recommended Service Interval: Up to 12,000 miles / 20,000 km (or as per manufacturer recommendation)

Key Features

• Enhanced filtration capacity for long oil change intervals

• Maintains excellent oil flow for engine performance

• Durable construction handles high pressure and temperature

• Drop-in fit for factory oil housings

• Designed for modern Toyota and Lexus engine platforms

Compatible Vehicles

The K&N SO-7020 fits a wide range of Toyota, Lexus, and Lotus vehicles equipped with cartridge-style oil filter housings. Below are selected compatible vehicles:

Toyota:

• Avalon 3.5L V6 – 2013 to 2022

• Camry 2.5L & 3.5L – 2010 to 2022

• Highlander 3.5L – 2014 to 2022

• Sienna 3.5L – 2011 to 2022

• Tacoma 3.5L V6 – 2016 to 2022

• RAV4 2.5L (non-hybrid) – 2009 to 2018

• Venza 3.5L – 2009 to 2015

Lexus:

• ES 350 – 2007 to 2022

• GS 350 – 2007 to 2020

• IS 350 – 2006 to 2020

• RX 350 – 2007 to 2022

• RC 350 – 2015 to 2022

• NX 300 / 350 – 2015 to 2022

Lotus:

• Evora 3.5L V6 – 2010 to 2018

Always confirm vehicle compatibility using the OEM oil filter number or VIN.

Installation Instructions

1. Remove the oil filter housing cap using the proper socket.

2. Remove the used cartridge and O-ring.

3. Lubricate and install the new O-ring on the cap.

4. Insert the new filter cartridge into the housing.

5. Tighten the cap to the specified torque.

6. Refill engine oil and start the engine.

7. Check for leaks and reset oil maintenance light if needed.