Wynn’s DPF & GPF On‑Car Cleaner 500 ml – In‑Situ Particulate Filter Restoration

? Description

Wynn’s DPF & GPF On‑Car Cleaner is a low-foam, non-flammable additive designed to clean and regenerate diesel (DPF) and gasoline (GPF) particulate filters without removing them from the vehicle. Injection is done via existing sensor ports, offering a fast, safe, and efficient in-situ solution. It dissolves soot and ash deposits, restoring filter efficiency and reducing emissions on the spot 

⚙️ Specifications

• Volume: 500 ml

• Product Code: W29079

• Formulation: Low-foam, non-flammable

• Application: All diesel and petrol particulate filters—no removal required 

• Pack: Comes with an applicator tube for easy insertion through sensor ports

? Key Features & Benefits

1. Safe in-place filter cleaning
   Clean filters directly through pressure, temperature, or oxygen sensor ports Removes soot and ash deposits

2. Effectively purges accumulated particulate matter without disassembly .

3. Non-flammable & low-foam
   Tailored for professional workshops, ensuring safety and minimal disruption 

4. Suitable for diesel and gasoline vehicles
   Works with both DPF and GPF-equipped engines .

5. Fast, efficient, no dismantling
   Apply quickly and return the filter to service in under an hour .

? How to Use

1. Insert the supplied applicator tube through a sensor port (e.g., pressure, temperature or oxygen sensor) into the filter housing 

2. Inject the 500 ml cleaner directly into the filter.

3. Allow 15–30 minutes for soaking .

4. Idle the engine for ~5 minutes, then rev to 2,000–2,500 rpm for another ~5 minutes .

5. Reinstall any sensors taken off and reset fault codes if necessary.

⚠️ Warnings & Notes

• Designed for 40–70% soot‑loaded filters; heavy blockages may require off-car cleaning or filter replacement  

• Use during scheduled maintenance; ensure oil level is correct before and after cleaning .

• A follow-up oil system and fuel system treatment is recommended for best results .